Configurarea SVXLink:
2. Exemplu de Editare a Configurației:
Editează secțiunile evidențiate mai jos cu roșu, folosind detaliile tale.
Pentru a introduce coordonatele tale LAT/LONG în fișierul de configurare, folosește Google Maps pentru a găsi LAT/LONG-ul tău, apoi folosește următorul calculator pentru a le converti în grade, minute și secunde (6 cifre în total): LAT LONG Calculator
Configuring SVXLink:
2. Edit Configuration Example:
Edit the following sections highlighted in red below with your details
To enter your LAT/LONG in the config file, use google maps to find your LAT/LONG and then use the following calculator to convert your LAT/LONG to Degrees Minutes Seconds (6 digits in total): LAT LONG Calculator
###############################################################################
# #
# Configuration file for the SvxLink server #
# #
###############################################################################
[GLOBAL]
MODULE_PATH=/usr/lib/arm-linux-gnueabihf/svxlink
#LOGICS=SimplexLogic,ReflectorLogic
LOGICS=ReflectorLogic,TetraLogic
#LINKS=ReflectorLink
CFG_DIR=svxlink.d
TIMESTAMP_FORMAT="%d.%m.%Y %H:%M:%S"
#TIMESTAMP_FORMAT="%c"
CARD_SAMPLE_RATE=48000
#SignalinkCard_Channels=1
#R12020_Card_Channels=2
CARD_CHANNELS=1 #Schimbați în CARD_CHANNELS=2 daca folosiți R1 2020 soundcard
LOCATION_INFO=LocationInfo
LINKS=LinkToDMOTetra
DEFAULT_LANG=en_US
DEBUG=2
[ReflectorLogic]
TYPE=Reflector
HOST= Serverul SvxLink dorit
PORT=5300
CALLSIGN="Callsign-ul dvs-L" # exemplu: M0JFF-L
AUTH_KEY="ReflectorPasswordHere" # Parola primită de la server admin
DEFAULT_TG=91
MONITOR_TGS=92,214,235,262,226++
JITTER_BUFFER_DELAY=250
TG_SELECT_TIMEOUT=30
ANNOUNCE_REMOTE_MIN_INTERVAL=300
EVENT_HANDLER=/usr/share/svxlink/events.tcl
NODE_INFO_FILE=/etc/svxlink/node_info.json
MUTE_FIRST_TX_LOC=0
MUTE_FIRST_TX_REM=0
DEFAULT_LANG=en_US
#TMP_MONITOR_TIMEOUT=3600
AUDIO_CODEC=OPUS
UDP_HEARTBEAT_INTERVAL=15
OPUS_ENC_COMPLEXITY=10
QSY_PENDING_TIMEOUT=10
OPUS_ENC_BITRATE=300000
OPUS_ENC_VBR=1
[TetraLogic]
TYPE=Tetra
#RX=TetraRx
RX=Rx1
TX=Tx1
TIME_FORMAT=24
DEBUG=3
MODULES=ModuleParrot,ModuleMetarInfo,ModuleEcholink
CALLSIGN=Callsign-ul dvs # exemplu: M0JFF-L
BAUD=9600
PORT=/dev/ttyUSB0
ISSI=9999
GSSI=1
MNC=16383
MCC=901
INIT_PEI=AT+CTOM=1;AT+CTSP=1,3,131;AT+CTSP=1,3,130;AT+CTSP=1,3,138;AT+CTSP=1,2,20;AT+CTSP=2,0,0;AT+CTSP=1,3,24;AT+CTSP=1,3,25;AT+CTSP=1,3,3;AT+CTSP=1,3,10;AT+CTSP=1,1,11;AT+CTSDC=0,0,0,1,1,0,1,1,0,0
SHORT_IDENT_INTERVAL=0
LONG_IDENT_INTERVAL=60
#IDENT_ONLY_AFTER_TX=4
#EXEC_CMD_ON_SQL_CLOSE=500
EVENT_HANDLER=/usr/share/svxlink/events.tcl
DEFAULT_LANG=en_US
RGR_SOUND_DELAY=0
RGR_SOUND_ALWAYS=0
MACROS=Macros
FX_GAIN_NORMAL=0
FX_GAIN_LOW=-12
APRSPATH=APRS,qAR,Callsign-ul dvs-10: # Exemplu: M0JFF-10
#ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink
#QSO_RECORDER=8:QsoRecorder
ONLINE_CMD=998877
MUTE_RX_ON_TX=0
MUTE_TX_ON_RX=0
#STATE_PTY=/var/run/svxlink/state
#SDS_PTY=/opt/sds_pty
SDS_PTY=/tmp/tetra_sds
DEFAULT_APRS_ICON=/r
#DTMF_CTRL_PTY=/dev/shm/simplex_dtmf_ctrl
#CTCSS_TO_TG=77.0:999,123.0:9990,146.2:9992
PROXIMITY_WARNING=3.1
TIME_BETWEEN_SDS=3600
INFO_SDS=Welcome new user
TETRA_USERS=Tetra_Users
TETRA_STATUS=Tetra_Status
SDS_ON_USERACTIVITY=SdsOnUserActivity
SDS_TO_OTHERS_ON_ACTIVITY=DMO_ON,DMO_OFF,PROXIMITY
#SDS_TO_OTHERS_ON_ACTIVITY=DMO_ON,PROXIMITY
SDS_TO_COMMAND=SdsToCommand
END_CMD=ATH
#DAPNET_SERVER=dapnet.afu.rwth-aachen.de
#DAPNET_PORT=43434
#DAPNET_CALLSIGN=
#DAPNET_KEY=.............
#DAPNET_RIC2ISSI=Ric2ISSI
#DAPNET_RUBRIC_REGISTRATION=RicRegistration
#DAPNET_USERNAME=
#DAPNET_PASSWORD=............
#DAPNET_WEBHOST=www.hampager.de
#DAPNET_WEBPORT=8080
#DAPNET_WEBPATH=/calls
#DAPNET_TXGROUP="yo-all","dl-all"
#DAPNET_TXGROUP="tetra-all"
[Ric2ISSI]
# RIC=ISSI
#.........=2269001
[RicRegistration]
# RIC=Rubric1,Rubric2,Rubric54 (in decimal)
#..........=1001,1028
#23451=1028,1051
[SdsOnUserActivity]
0=Hello from Callsign-ul dvs-L! Refer to vktetra.com for more info. # Exemplu: M0JFF-L
1=You have powered off
2=You want to declare the state of emergency?
3=Push-to-talk condition is detected
4=Status
5=TXI=on
7=TMO mode available
#8=DMO mode available
9=ENTER SERVICE (after being out of service)
10=Service Loss
[Tetra_Users]
# ISSI = Call,Name,comment
0123456789=M0JFF-1,username,/1,TETRA DMO 431.225 leipzig2000.dyndns.org - STP9000
01234567890123=M0JFF-2,username,/2,TETRA DMO 431.225 leipzig2000.dyndns.org - MTH850
12345678909870=M0JFF-3,username,/3,TETRA DMO 431.225 leipzig2000.dyndns.org - MTP3250
12345678909876=M0JFF-4,username,/4,TETRA DMO 431.225 leipzig2000.dyndns.org- MTP36550
01234567890123=M0JFF-5,username,/5,TETRA DMO 431.225 leipzig2000.dyndns.org - MTM800
0123412341234=ISSI-ul stației=Callsign-ul dvs-1,Numele dvs,/1,Tetra DMO frecvența Gateway leipzig2000.dyndns.org
# Exemplu: 0123456789765=M0JFF-1,nume,/1,TETRA DMO 431.2250 leipzig2000.dyndns.org
[Tetra_Status]
# status=message
32849=not available
32850=available
32851=no further information
61004=Parrot:
61010=MetarInfo:1
32833=Echolink:490278
32834=Echolink:
[SdsToCommand]
33280=121
33281=120
61000=9*
33009=919
33391=9191
33040=91204
33080=91208
33260=91226
33320=91232
33620=91262
33350=91235
34003=912263
34006=912266
34007=912267
34009=912269
33140=91214
40990=919990
36050=91505
36051=915050
36052=915051
36053=915052
36054=915053
36055=915054
36056=915055
36057=915056
36058=915057
36059=915058
36060=9150591
36061=9150592
36062=9150593
36063=9150594
36065=9150598
36066=9150599
36067=91505901
36068=91505902
36069=919990
[LinkToDMOTetra]
CONNECT_LOGICS=TetraLogic:9:Link,ReflectorLogic:8:Link2
DEFAULT_ACTIVE=1
TIMEOUT=180
ACTIVATE_ON_ACTIVITY=TetraLogic
[Macros]
61004=Parrot:
61010=MetarInfo:1
32833=Echolink:490278#
32834=Echolink:#
[Rx1]
TYPE=Local
#RX_ID=?
AUDIO_DEV=alsa:plughw:0
AUDIO_CHANNEL=0
#AUDIO_DEV_KEEP_OPEN=0
LIMITER_THRESH=-6
#SQL_DET=INTERNAL
SQL_DET=TETRA_SQL
SQL_START_DELAY=150
SQL_DELAY=40
SQL_HANGTIME=500
#SQL_EXTENDED_HANGTIME=1000
#SQL_EXTENDED_HANGTIME_THRESH=15
SQL_TIMEOUT=180
#VOX_FILTER_DEPTH=20
#VOX_THRESH=1000
#CTCSS_MODE=2
#CTCSS_FQ=136.5
#CTCSS_SNR_OFFSET=0
#CTCSS_OPEN_THRESH=15
#CTCSS_CLOSE_THRESH=9
#CTCSS_BPF_LOW=60
#CTCSS_BPF_HIGH=270
SERIAL_PORT=/dev/ttyUSB0
SERIAL_PIN=CTS
SERIAL_SET_PINS=DTR!RTS
#EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03
#EVDEV_OPEN=1,163,1
#EVDEV_CLOSE=1,163,0
#GPIO_PATH=/sys/class/gpio
#GPIO_SQL_PIN=gpio18
#PTY_PATH=/tmp/rx1_sql
#HID_DEVICE=/dev/hidraw0
#HID_SQL_PIN=!VOL_DN
#SIGLEV_DET=TONE
#SIGLEV_SLOPE=1
#SIGLEV_OFFSET=0
#SIGLEV_BOGUS_THRESH=120
#TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8
#SQL_SIGLEV_OPEN_THRESH=30
#SQL_SIGLEV_CLOSE_THRESH=10
#DEEMPHASIS=0
#SQL_TAIL_ELIM=50
PREAMP=0
PEAK_METER=0
#DTMF_DEC_TYPE=INTERNAL
#DTMF_MUTING=1
#DTMF_HANGTIME=40
#DTMF_SERIAL=/dev/ttyS0
#DTMF_PTY=/tmp/rx1_dtmf
#DTMF_MAX_FWD_TWIST=8
#DTMF_MAX_REV_TWIST=4
#1750_MUTING=1
#SEL5_DEC_TYPE=INTERNAL
#SEL5_TYPE=ZVEI1
#FQ=433475000
#MODULATION=FM
#WBRX=WbRx1
#OB_AFSK_ENABLE=0
#OB_AFSK_VOICE_GAIN=6
#IB_AFSK_ENABLE=0
[TetraRx]
TYPE=Local
#RX_ID=1
AUDIO_DEV=alsa:plughw:0
AUDIO_CHANNEL=0
#AUDIO_DEV_KEEP_OPEN=0
#SQL_DET=GPIO
#SQL_DET=PTY
SQL_DET=TETRA_SQL
SQL_START_DELAY=0
SQL_DELAY=0
SQL_HANGTIME=2000
#SQL_EXTENDED_HANGTIME=1000
#SQL_EXTENDED_HANGTIME_THRESH=15
SQL_TIMEOUT=180
#VOX_FILTER_DEPTH=20
#VOX_THRESH=1000
#CTCSS_MODE=2
CTCSS_FQ=136.5
#CTCSS_SNR_OFFSET=0
#CTCSS_OPEN_THRESH=15
#CTCSS_CLOSE_THRESH=9
#CTCSS_BPF_LOW=60
#CTCSS_BPF_HIGH=270
SERIAL_PORT=/dev/ttyUSB0
SERIAL_PIN=CTS
SERIAL_SET_PINS=DTR!RTS
#EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03
#EVDEV_OPEN=1,163,1
#EVDEV_CLOSE=1,163,0
#GPIO_PATH=/sys/class/gpio
#GPIO_SQL_PIN=gpio18
#PTY_PATH=/tmp/tetrarx_sql
#HID_DEVICE=/dev/hidraw0
#HID_SQL_PIN=!VOL_DN
#SIGLEV_DET=TONE
#SIGLEV_SLOPE=1
#SIGLEV_OFFSET=0
#SIGLEV_BOGUS_THRESH=120
#TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8
#SIGLEV_OPEN_THRESH=30
#SIGLEV_CLOSE_THRESH=10
#DEEMPHASIS=0
#SQL_TAIL_ELIM=300
PREAMP=9
PEAK_METER=0
#DTMF_DEC_TYPE=INTERNAL
#DTMF_MUTING=1
#DTMF_HANGTIME=40
#DTMF_SERIAL=/dev/ttyS0
#DTMF_PTY=/tmp/rx1_dtmf
#DTMF_MAX_FWD_TWIST=8
#DTMF_MAX_REV_TWIST=4
#1750_MUTING=1
#SEL5_DEC_TYPE=INTERNAL
#SEL5_TYPE=ZVEI1
#FQ=433475000
#MODULATION=FM
#WBRX=WbRx1
#OB_AFSK_ENABLE=0
#OB_AFSK_VOICE_GAIN=6
#IB_AFSK_ENABLE=0
[Tx1]
TYPE=Local
TX_ID=T
AUDIO_DEV=alsa:plughw:0
AUDIO_CHANNEL=0
#AUDIO_DEV_KEEP_OPEN=0
LIMITER_THRESH=-6
PTT_TYPE=NONE
#PTT_PORT=/dev/ttyS0
#PTT_PIN=gpio19
#HID_DEVICE=/dev/hidraw0
#HID_PTT_PIN=GPIO3
#SERIAL_SET_PINS=DTR!RTS
#GPIO_PATH=/sys/class/gpio
PTT_HANGTIME=2000
#PTT_HANGTIME=150
TIMEOUT=180
TX_DELAY=1000
#CTCSS_FQ=136.5
#CTCSS_LEVEL=9
#PREEMPHASIS=0
#DTMF_TONE_LENGTH=100
#DTMF_TONE_SPACING=50
#DTMF_DIGIT_PWR=-15
MASTER_GAIN=0.0
#OB_AFSK_ENABLE=0
#OB_AFSK_VOICE_GAIN=-6
#OB_AFSK_LEVEL=-12
#OB_AFSK_TX_DELAY=100
#IB_AFSK_ENABLE=0
#IB_AFSK_LEVEL=-6
#IB_AFSK_TX_DELAY=100
[LocationInfo]
APRS_SERVER_LIST=euro.aprs2.net:14580
STATUS_SERVER_LIST=aprs.echolink.org:5199
LON_POSITION= Poziția LONG în Grade Minute Secunde # Exemplu: 123.21.44E
LAT_POSITION= Poziția LAT în Grade Minute Secunde # Exemplu: 38.22.122
CALLSIGN=EL-Callsign-ul dvs # Exemplu: EL-M0JFF
FREQUENCY=Frecvența dvs # Exemplu: 431.225
TX_POWER=3
ANTENNA_GAIN=0
ANTENNA_HEIGHT=10m
ANTENNA_DIR=0
PATH=WIDE1-1
BEACON_INTERVAL=60
#TONE=136
PTY_PATH=/opt/aprs
COMMENT=TETRA DMO - Locația dvs Gateway-ul dvs Frequency leipzig2000.dyndns.org: # Exemplu: UK, M0JFF-L
[QsoRecorder]
REC_DIR=/tmp
#MIN_TIME=1000
MAX_TIME=3600
SOFT_TIME=300
MAX_DIRSIZE=1024
DEFAULT_ACTIVE=1
TIMEOUT=300
QSO_TIMEOUT=300
#ENCODER_CMD=/usr/bin/lame --quiet "%f" "%d/%b.mp3" && rm "%f
ENCODER_CMD=/usr/bin/lame --quiet \"%f\" \"%d/%b.mp3\" && rm \"%f\"
După ce fișierul tău este actualizat, salvează-l și copiază-l în /etc/svxlink/, suprascriind fișierul svxlink.conf existent.
În acest moment vei primi o mulțime de erori. Asta se întâmplă pentru că trebuie să conectezi mai întâi radioul tău prin cablul FTDI și placa de sunet.
3. Salvare și Copiere:
– Salvează fișierul actualizat și copiază-l în directorul /etc/svxlink/, suprascriind fișierul svxlink.conf existent.
Susține proiectul HamTetra.com Aici